Some exception handling methods of automatic pipeline

In the production process, automatic assembly line equipment will have some failures, which will have a huge adverse impact on the work of employees. Let's teach you how to deal with the abnormal fault of the automatic assembly line.
1. Determine the fault location of automatic assembly line equipment:
The analysis and judgment can be made by observing the abnormal changes of the parts at the fault location. Sometimes, it can also rely on the machine to analyze and diagnose the abnormal signals and phenomena when the automatic assembly fault (type and reason) occurs. At present, many people are still relying on the shutdown after the disintegration. Use human experience to analyze and judge. With the rapid development of electronic technology, fault analysis and detection equipment can effectively measure and analyze, diagnose the nature, cause, location and location of machine faults, and provide basic conditions for troubleshooting methods.
2. Replace faulty parts of automatic assembly line
Reassembly for troubleshooting is a common method. For example, if a leak is found between the shaft and the oil seal, replace the faulty part with a good one. Through analysis, judgment and test, it is determined that the oil seal is deformed and invalid. If the oil seal of the same specification is replaced, the leakage disappears and the fault is eliminated. Another example is to hit the coupling assembly with elastic intermediate during the transportation of automatic assembly line. After disassembly and test, it was determined that the rubber intermediate was worn and cracked, resulting in coupling collision. Remove the fault by replacing the intermediate. After reassembly, the sound is eliminated, the operation is stable, and the fault is eliminated.
3. Repair vulnerable parts of automatic assembly line
At this point, the worn parts can be repaired. The cause of equipment failure is usually the wear of parts. Troubleshooting the automatic assembly line equipment after reassembly, adjustment and commissioning.
Automatic assembly line is an automatic electromechanical equipment system developed gradually on the basis of assembly line and various automatic special equipment. In the process of automatic assembly line, quality management is a very important part, which will directly affect product quality, delivery time and company profits.
The reason why automatic assembly line can become a system is that it is a comprehensive technology based on mechanical technology, computer technology, sensor technology, drive technology, interface technology, etc. It applies these technologies from the perspective of system engineering. And carry out effective organization and integration according to production needs, so as to realize the optimization of the overall equipment.
Therefore, although the automatic pipeline originates from the similarities between pipeline and pipeline, its performance is far better than that of pipeline, and there are many significant differences. The more important feature is that the automatic assembly line has a unified automatic control system than the assembly line, with a higher degree of automation and a stricter production rhythm. The work needs to go through a certain production cycle: the workstation completes the scheduled processing.